AOS 7 Freestyle Quadcopter Frame

As frame size increases frame resonance and vibration become more of a problem. Larger props create more vibration and because they spin more slowly this vibration occurs at lower frequencies. Longer arms exacerbate this problem. The longer the arm the lower its resonant frequency.

To overcome this problem the AOS 7 uses a split arm design to align the carbon fibre in both arm struts with the applied load. This significantly increases the stiffness of the diagonal strut and its associated resonant frequencies. In addition, the AOS 7 builds on the design of the AOS 5.5 by using a wider central section to reduce the unsupported length of each arm.

The result is a 7inch frame with exceptional resonant performance that allows you to run less filtering and higher PID gains. Enjoy a smoother and more responsive flight feel with less propwash, less oscillations and cooler motors.

Specifications

• ~230g with all hardware
• Designed for 7 inch props
• 8 mm Arms
• 2.5 mm Top Plate, Bottom Plate and Sandwich Plates
• Up to three 30.5×30.5 mm or 20×20 mm stacks
• 32x32mm GoPro mounting holes in top plate
• Fits the DJI Air Unit or Caddx Vista perfectly
• Fits the DJI FPV camera 20*20mm
• Recommended motor size 2806.5
• Standoffs, frame and motor screws included

Included

• 1x AOS 7 FPV Frame Kit